Low Moisture Steam Cleaners

Low Moisture Steam Cleaners - How Well do They Clean Carpets?

2012-01-23T22:45:00.000-08:00

Low moisture steam cleaners, unlike carpet cleaning machines, cannot clean large carpeted areas. They are however, invaluable when it comes to spot cleaning carpets. Spills, stains, fungal colonies, allergens — these can be removed from carpets quickly and without fuss if you use a quality steam cleaner.

Not all low moisture steam cleaners are as sturdy or efficient as they are made out to be. Some low moisture steam cleaners are very inefficient. They lose pressure fast and the temperature level drops within 15 minutes. This compels the user to stop the machine, refill the boiler, and wait for it to rebuild pressure before they can begin cleaning again.

Daimer® on the other hand, offers low moisture steam cleaners that are built for nonstop use. The KleenJet® Pro Plus 300CS, for example, has a continuous refilling feature. This means that you can fill the boiler even while the machine is running. Usually, this is impossible due to the high pressure inside a steam cleaner’s boiler. The KleenJet® Pro Plus 300CS, on the other hand, has a non pressurized refilling chamber through which the boiler is refilled.

Steam cleaners are not recommended for cleaning large stretches of carpets. They do not contain the right pressure levels and their high temperature settings can damage carpets. Even when spot cleaning, it is recommended to make sure your carpets can handle the high temperature settings of steam cleaners.

Using Daimer®’s steam cleaners, you can clean small rugs, carpet corners and stained portions, mattresses, and cushions. Learn more about the applications of low moisture steam cleaners on www.daimer.com.

Low Moisture Steam Cleaners - Cleaning Bathroom Tubs and Fixtures

2011-12-04T22:50:00.000-08:00

Low moisture steam cleaners make short work of bathroom cleaning. Bathroom tubs and sinks gather much dirt from constant use. Soap scum, mineral scales, molds, and even algae may coat the surface, dulling it and creating a health or slip hazard for others. Worse, these fixtures may harbor germs, and many of these germs are potent enough to cause serious diseases such as staph infections.

Urinal seats are counted among the dirtiest surfaces in commercial locations. If you are in charge of cleaning bathrooms in hotels, theaters, amusement parks, malls, and other large commercial areas, you know how anxious people are about the hygiene of the bathrooms they are using. Dirty, poorly maintained bathrooms can make people ill, cause odors, and turn people away. Therefore, contractors use low moisture steam cleaners to clean these surfaces quickly and effectively.

Daimer® offers a sophisticated lineup of commercial steam cleaners designed to clean large areas on a daily basis. Daimer®’s low moisture steam cleaners, including the KleenJet® 5000CVP, have several advantages. They are inherently water efficient as they use the least amount of water for cleaning. Also, these machines emit very hot steam up to 369˚F, which dissolves dirt and makes the cleaning process easier.

Moreover, these machines have durable, self cleaning, stainless steel boilers with a lifetime warranty, saving thousands of dollars in repair and replacement costs. Finally, these low moisture steam cleaners have many types of detailing brushes for cleaning every type of surface, no matter what material and texture, or size.

Many low moisture steam cleaner machines can be used for removing chewing gum from commercial restrooms, and steam cleaning machines with ATIS™ anti-bacterial technology can destroy more than 99 percent of germs on the surface. To learn more about the features of Daimer®’s vapor steam cleaners, visit www.daimer.com.

Low Moisture Steam Cleaners - Unsuitable for Degreasing Jobs

2011-11-16T22:51:00.000-08:00

To deal with the challenging cleaning jobs in industrial environments, cleaning professionals routinely turn to low moisture steam cleaners. By ejecting steam at extremely high temperatures, these steam cleaners help simplify the toughest of cleaning activities. The KleenJet® Supreme 3000CV, provided by Daimer®, is an excellent steam cleaner capable of ejecting steam at pressure levels at 115 psi and temperatures as high as 364ºF. The superdense steam guarantees the best-ever cleaning results.

Although low moisture steam cleaners do help manage a wide array of cleaning operations, they are not ideal for heavy-duty degreasing tasks in industrial areas. Effective degreasing calls for powerful cleaning machines such as pressure washers, featuring high temperatures, high pressure levels, and low flow rates. While low moisture steam cleaners can generate steam at high temperatures, they do not possess the kind of pressure levels needed for efficient degreasing. As a result, these steam cleaning units are not powerful enough to tackle degreasing applications.

The right machines for degreasing are steam pressure washers in the SuperMax™ series from Daimer®. Unlike low moisture steam cleaners, steam pressure cleaners can generate steam at high pressure levels. While the hot steam dissolves greasy deposits, the high pressure levels blast away the dissolved deposits. The SuperMax™ 6120SCW is a type of steam pressure cleaning equipment that generates pressure levels of 1000 psi, flow rates of 0.5 GPM, and steam temperatures of up to 250ºF.

There is an extensive array of low moisture steam cleaners and steam pressure washers available at www.daimer.com. Check out the entire range to find the right one for your needs.

Tips to Use Low Moisture Steam Cleaners for Gym Cleaning

2011-09-15T22:59:00.000-07:00

Low moisture steam cleaners are the perfect cleaning machines for cleaning and sanitizing gyms, health clubs, fitness centers, and spas. These machines have the necessary output temperature to remove stains and the technology to eliminate harmful microorganisms from both the floor and the fitness equipment. But that does not mean one can pick a steam cleaning machine and start cleaning the gym. There are certain factors that one must keep in mind when using low moisture steam cleaners. This post deals with some of those important things.

Use Dry Steam
Good low moisture steam cleaners use what is called dry vapor as output. It is a superheated form of water that uses less than 5 percent liquid content. Dry steam uses less water than other cleaning methods, meaning not only is little water used during the cleaning process, but there is less liquid residue to clean up after the completed job.

Use Anti-Bacterial Technology
One must use low moisture steam cleaners equipped with a good anti-bacterial technology. The ATIS® technology from Daimer®, one of the most innovative suppliers of cleaning machines, is a good example here. External lab tests have proved this technology can kill off more than 99 percent of commonly occurring disease-causing microorganisms, including E.Coli and Salmonella.

Daimer® offers many models of low moisture steam cleaners through the KleenJet® series. For product description and other information on these machines, visit www.daimer.com.

Advantages of Using Low Moisture Steam Cleaners for Floor Maintenance

2011-09-05T00:27:00.000-07:00

Gone are the days when cleaning simply consisted of dusting, mopping, washing, and vacuuming. Now, home owners and maintenance professionals are keen to implement the latest cleaning, sanitizing, and deodorizing technologies in their respective premises. When it comes to maintaining floors, low moisture steam cleaners seem to be the undisputed favorite. If you are interested in high-performance steam cleaning systems empowered with antibacterial capabilities and odor elimination functions, you must definitely check out the KleenJet® series from Daimer®.

With high-grade, stainless steel heating components, the KleenJet® range of low moisture steam cleaners is capable of generating dry steam at super hot temperatures up to 386°F. Dry steam contains very little moisture. Therefore, cleaning using dry steam is an effective and safe method of maintaining even delicate surfaces that can be damaged by too much water.

Floor steam cleaning machines in the KleenJet® series, such as the KleenJet® 500VP, are capable of cleaning, extracting, and vacuuming a range of floor types. Thanks to the unique combination of dry steam and vacuum extraction, there will be no traces of water left behind on floors after a steam cleaning session. These low moisture steam cleaners are versatile in that they function as a steam vacuum cleaner, wet vacuum cleaning machine, and vapor steam cleaning system.

When you need to maintain extremely dirty floors, you have the choice of improving the cleaning action of these low moisture steam cleaners by adding cleaning chemicals into the detergent tank. With the advanced ATIS® technology, these steam cleaning machines successfully eliminate more than 99 percent of germs, viruses, and bacteria lurking on your floors.

Visit www.daimer.com to discover more advantages of low moisture steam cleaners for floor maintenance.

Get the Spots Out With Low Moisture Steam Cleaners

2011-08-17T23:27:00.000-07:00

Low moisture steam cleaners have many uses in commercial and industrial areas. These units generate vapor that only contains 5 percent moisture, making it ideal for cleaning jobs that do not require excessive water usage. Steam cleaners are often used for cleaning commercial kitchen areas like counters, deep freezers and even ovens and grills. Low moisture steam cleaners can also be useful in spot cleaning upholstery and carpeting. While it is true steam cleaning units cannot be used for cleaning large areas of carpets, they are ideal for dissolving away isolated stubborn stains and sedimentation confined to small areas.

Daimer® understands carpets sometimes offer the toughest kinds of cleaning challenges. Liquid spills, food stains and even ground-in dirt and debris can end up causing unsightly smudges and spots on the carpet. If the stain is allowed to harden over time, it can be even more difficult to remove. In some cases, the stain might be very stubborn and will attract germs and bacteria as well. While carpet cleaning agents can certainly be effective, low moisture steam cleaners offer a more concentrated cleaning option. These units will only focus on the stain at hand, using superheated water to soften and dissolve the sediment for easy removal.

Consider using a machine such as Daimer®’s KleenJet® 3000CVP. Such low moisture steam cleaners in the KleenJet® series, including the KleenJet® 3000CVP, feature ATIS® anti-bacterial technology for removing more than 99 percent of harmful germs and bacteria on the surface. Daimer® steam cleaners can also reach up to 386°F, so it is important to make sure carpets can withstand such high temperatures before cleaning. More information on low moisture steam cleaners and other cleaning machines can be found at www.daimer.com.

Pros and Cons of Low Moisture Steam Cleaners

2011-07-28T00:54:00.000-07:00

Low moisture steam cleaners are powerful and versatile cleaning machines for hard surface cleaning. Daimer® top quality machines provide an output temperature of 386°F. In addition, these can be used to clean almost any type of hard surfaces, including concrete, tile, hard wood, and metal surfaces. However, these cleaning machines cannot manage all types of surfaces. This post deals with the types of cleaning tasks for which low moisture steam cleaners are both suited and not suited for.

Suitable Jobs
A steam cleaning machine from Daimer®, such as the KleenJet® 5000 CVP, cleans with its high temperature output. That implies two things. First, these are suitable for getting rid of stains, hardened dirt, or other impurities that are not easy to remove using a normal temperature output. Second, these can be used only on hard surfaces that can withstand the high output temperature of the machines.

Modern low moisture steam cleaners from Daimer® are equipped with an array of technologies that makes cleaning job easier and quicker. Some of the major features are automatic refilling technology (which helps to work continuously), ATIS® technology (which helps to get rid of harmful microorganisms), and an attached vacuum.

Unsuitable Tasks
Low moisture steam cleaners are not suitable for cleaning jobs that require a high output pressure. Even the most sophisticated steam cleaning machines from Daimer® offer a maximum output pressure of 150 psi. That means these machines are not suitable for tasks like heavy duty industrial degreasing.

Daimer®, a premier supplier of cleaning machines, offers the best low moisture steam cleaners. For more details, visit www.daimer.com.

Maintaining Gyms with Low Moisture Steam Cleaners

2011-07-24T23:10:00.000-07:00

With the growing emphasis on fitness and health, more people are now showing up at gyms to work out on the various fitness equipments. Although most popular gyms are well-maintained and look clean and gleaming, remember that the real picture is, in fact, quite different. As people work out, the heat and sweat from their bodies creates a warm atmosphere that can favor the growth of bacteria and germs. Simply wiping or using chemical disinfectants will not work here. In such situations, you must turn to low moisture steam cleaners.

To help you maintain gyms in impeccably clean condition, Daimer® - a leading distributor of innovative cleaning machines – brings you the KleenJet® series of low moisture steam cleaners that combine excellent construction and quality components with unique technologies and adherence to safety standards. The compact design and portable nature of these steam cleaning machines make them easy to store and use.

When it comes to cleaning and disinfecting areas like gyms, nothing can match the performance of low moisture steam cleaners. By ejecting super-heated steam up to 386°F and incorporating anti-bacterial technology, these steam-cleaning machines help simultaneously clean, disinfect, and deodorize a range of surfaces in gyms like fitness equipment, floors, restrooms, and shower stalls.

One interesting feature in the KleenJet® series of low moisture steam cleaners is its ATIS® function. This anti-bacterial technology efficiently removes more than 99 percent of pathogens, bacteria, and germs from fitness equipment and other surfaces shared by users. Since these steam cleaning units come with stainless boilers, you need not worry about cheap materials breaking apart.

Check out these low moisture steam cleaners at www.daimer.com.

Why Low Moisture Steam Cleaners Are Eco-Friendly

2011-07-06T02:35:00.000-07:00

Not just suppliers of low moisture steam cleaners, but distributors of almost all cleaning machines, claim that their products are the most eco-friendly equipment and the best product on the market. However, people with sufficient know-how in the cleaning industry know that some of the cleaning machines work best only with cleaning agents. If the operators use artificial detergents, the residues that these machines leave behind are often far more dangerous than the actual dirt they remove.

The main advantage of low moisture steam cleaners is that these machines do not require the help of cleaning agents. Their high steam temperatures are often enough to eliminate tough dirt and stains.

How They Work
Low moisture steam cleaners work by ejecting high temperature output onto hard surfaces, which melts stains or dirt present on the surface. The dissolved dirt has to be removed either by a vacuum or by a towel. Daimer® steam cleaners, including the KleenJet® 8423-160 CVP, feature attached vacuums for easy removal. These machines depend almost entirely on the temperature for cleaning. That means there is no real need for any artificial detergent to enhance the cleaning efficiency of these machines.

Sanitization
The high temperature output of low moisture steam cleaners combined with Daimer®’s advanced ATIS® anti-bacterial technology helps sanitize the surface too. This technology eliminates more than 99 percent of commonly found germs and bacteria on surfaces.

Daimer®, a leading supplier of cleaning products, offers some of the best eco-friendly low moisture steam cleaners. For more details, visit www.daimer.com.

What Low Moisture Steam Cleaners Can Do For Your Floors

2011-06-07T22:50:00.000-07:00

Many people are aware of the various uses low moisture steam cleaners have in different commercial and industrial areas. One of these uses is to clean hard floors. While it is certainly true that vapor steam cleaners are an effective way to clean hard surfaces, it is also important to know the correct way to use them on flooring. Just as cleaning carpets with steam cleaners needs to be handled differently, hard floor cleaning also needs to be approached bearing a few important aspects in mind.

Low moisture steam cleaners from Daimer® generate vapor that only contains 5 percent water. This low water content makes it ideal for cleaning surfaces like hardwood flooring. If hardwood surfaces are cleaned using too much water, it can damage and warp the wood and even cause fungal growth in certain cases. Low moisture steam cleaners can be safely used on sealed wood and hardwood floors using low pressure settings. For best results, cleaning should be done using a large, rectangular brush and towel using a fast, vacuuming motion to clean.

Low moisture steam cleaners can also be used to clean surfaces like tile, laminate, and vinyl. Using steam cleaning technology on these kinds of surfaces does away with the need for harsh chemical cleaning agents. Daimer® includes over 36 different parts and accessories with many of their KleenJet® steam cleaners. Such accessories include squeegee wands, floor wands, brushes, and more.

The superheated water works to loosen and remove stubborn stains and deposits in a safe but effective manner. Even sticky stains or very old deposits can be softened and melted away with relative ease. There is more information available on low moisture steam cleaners at www.daimer.com.

Low Moisture Steam Cleaners—Why Are They Unsuitable for Degreasing Jobs?

2011-06-01T23:08:00.001-07:00

Today, cleaning professionals regularly use low moisture steam cleaners to accomplish various cleaning activities in industrial areas. The superhot dry steam ejected by these steam cleaning machines helps simplify tough cleaning jobs.

Low moisture steam cleaners, like the KleenJet® Supreme 3000CV available from Daimer®, help maintain different surfaces by generating steam temperatures of up to 364ºF and pressure levels of 115 psi. Another remarkable aspect of these steam cleaning systems is their ability to generate high-density steam that is around 200 percent denser than the steam generated by conventional versions.

Although these low moisture steam cleaners feature high temperature levels and cleaning capabilities, they are not ideal for certain cleaning tasks such as degreasing applications. Efficient degreasing results demand high temperatures and high pressure levels. Steam cleaning machines do possess high temperatures, but they score low when it comes to pressure levels. As a result, steam cleaning systems do not offer effective degreasing functions.

To accomplish heavy-duty degreasing jobs, you must choose steam pressure cleaners instead of low moisture steam cleaners. The SuperMax™ range of steam pressure washers from Daimer® is highly recommended for such jobs. For instance, steam-based pressure cleaning machines like the SuperMax™ 6000 attain high temperatures of up to 330ºF and high pressure levels of 750 psi, the perfect combination required for efficient degreasing. It also features low flow rates of 1.4 GPM. Low moisture levels make the SuperMax™ 6000 ideal for degreasing industrial machinery as there is no risk of damage due to excess water.

For more details about the advantages and limitations of low moisture steam cleaners, visit www.daimer.com.

Spot Cleaning Carpets with Low Moisture Steam Cleaners

2011-05-10T23:00:00.000-07:00

Low moisture steam cleaners are widely used to accomplish a range of cleaning applications such as maintaining vehicle exteriors, pet cages, bathroom fittings, mattresses, refrigerators, kitchens, toilets, hardwood floors, trash bins, and plastic fences. However, not many people know that these steam-cleaning machines are also ideal for spot cleaning carpets.

The KleenJet® range of low moisture steam cleaners available from Daimer® is excellent for spot cleaning carpeted areas. However, you must remember that the cleaning technologies in these steam cleaning systems have not been designed to accomplish professional carpet cleaning results and are only meant for spot cleaning small areas.

The hot steam generated by low moisture steam cleaners helps dissolve caked on dirt, greasy deposits, or tough stains on carpets. That means you can now refrain from rigorously scrubbing or using harsh detergents to clean stains from your carpets. All you have to do is direct hot steam on the stains and then clean up the dissolved deposits. Since the volume of water in the ejected steam is very low, it helps clean carpets without making the carpets too wet. The steam-cleaned carpets are thus able to dry out quickly.

The extremely high steam temperatures of machines such machines as the KleenJet® 8844-360 CVP features high steam temperatures up to 386°F. In addition, this machine also has Daimer®’s ATIS® technology, enabling low moisture steam cleaners to disinfect surfaces. In fact, ATIS® technology has been proven to eliminate more than 99 percent of harmful bacteria, germs, and pathogens from various surfaces. Other notable technologies of steam cleaning equipment include self-cleaning boilers and vacuum extraction functions.

The next times you discover a nasty stain on your carpet, forget cleaning solutions and reach for low moisture steam cleaners instead. Visit www.daimer.com to discover more interesting ways to use steam cleaning machines.

Uses of Low Moisture Steam Cleaners

2011-05-02T23:18:00.000-07:00

Ever since they were introduced into the market, low moisture steam cleaners have been popular cleaning machines for many professionals. The reasons for their popularity are not hard to understand. These machines are head and shoulders above other machines when it comes to the drying times and cleaning efficiency.

Low moisture steam cleaners significantly reduce the amount of water used during cleaning. When compared to pressure washers, which use gallons of water per minute, steam cleaners use steam with only 5 percent water content. This helps reduce the watery mess created during the cleaning process.

The following is an overview of common uses of low moisture steam cleaners.

Cleaning Toilets and Bathrooms
Steam cleaners are excellent choices for cleaning toilets and bathrooms. The high temperature output of these machines from Daimer®, which can range up to 386°F, can dissolve tough dirt and stains from hard surfaces. In addition, modern models of low moisture steam cleaners are equipped with specialized antibacterial ATIS® technology that can kill more than 99 percent of commonly occurring bacteria and fungi.

Other Uses
Other uses of these machines include gum removal, floor cleaning, kitchen cleaning, and cleaning windows and frames. For best results, use low moisture steam cleaners provided by reputable distributors like Daimer®. For more details, visit www.daimer.com.

Low Moisture Steam Cleaners for Decontaminating and Deodorizing Bathrooms

2011-04-11T23:29:00.001-07:00

Low moisture steam cleaners are one of the most eco-friendly and effective machines for cleaning and sanitizing bathrooms. These machines use very little water because they generate dry steam, containing less than 5 percent water. The heat helps dissolve stubborn dirt and stains, and, when equipped with Daimer®’s ATIS® anti-bacterial technology, can eliminate more than 99 percent of disease causing germs and bacteria on bathroom surfaces. Daimer® sells low moisture steam cleaners with high-grade component parts, a variety of detailing tools, and a range of state-of-the-art technological advantages.

Low moisture steam cleaners usually require no detergents, eliminating the need for using toxic, expensive, corrosive chemicals on easily corroded surfaces, such as metal. Powerful temperature levels are often enough to effectively break down tough dirt and stains on bathroom surfaces, such as shower stalls, toilets, sinks, mirrors, and more.

Daimer®’s steam cleaning machines attain very high temperatures. The KleenJet® Mega 500VP, for example, offers temperature peaking at 310°F. The boiler and housing are made of stainless steel to prevent corrosion and increase endurance to high pressure and temperature.

Daimer’s low moisture steam cleaners, such as the KleenJet® 8844-360CVP, attain temperatures as high as 386°F. This steam cleaning machine also offers a continuous refill feature, which allows the user to refill the boiler while the machine is in use. It has pressure level has high as 150 psi and also offers the anti-allergen benefits of a HEPA filter and Daimer® ATIS® technology for removing most germs and bacteria found in bathrooms. A combination of heat, powerful car detailing tools, ATIS® technology, and HEPA filtration will help sanitize every corner of the bathroom, elimination dust, dirt, dander, water stains, soap scum, molds, and bacteria. Visit www.daimer.com for more information on steam cleaners and their accessories.

Low Moisture Steam Cleaners for Health Clubs

2011-03-21T23:30:00.000-07:00

Low moisture steam cleaners are a recent innovation in the cleaning industry. The idea behind these machines is to use high steam temperature to melt and dissolve stains and dirt on hard surfaces. The technology behind these brand new machines achieves the seemingly contrasting objectives without much effort. The following is an overview of top quality low moisture steam cleaners.

What are Low Moisture Machines?
Low moisture output means the output contains a very low quantity of water. Sophisticated models of low moisture steam cleaners use dry steam as output. Water is heated to a high temperature to make it dry steam. Technically, dry steam contains slightly less than 5% of water content.

Good quality machines provide an output temperature up to 386°F. This range of high output temperature allows for easily dissolving and removing stubborn dirt and stains.

Benefits
Low moisture steam cleaners have many advantages. The main unique benefit is the considerable reduction in the drying time of the cleaned surfaces. Since these machines transfer a very low quantity of water to the surface, it dries up quickly. It is estimated that most of the surfaces dry up within a couple of hours when cleaned with these types of machines.

Another advantage is the high cleaning power of the dry steam output. It can melt even very old and strongly bound dirt and stains. It is important to buy low moisture steam cleaners from top-notch distributors, such as Daimer®, to get the full benefits. For more details, visit www.daimer.com.

Low Moisture Steam Cleaners – For Commercial Applications

2011-03-07T21:52:00.000-08:00

Using low moisture steam cleaners is the smartest way to keep your office and business clean and germ free. Because these cleaning systems use very little water and rely of the power of steam to clean, they become an eco-friendly cleaning option without having to use harmful chemicals or detergents.

The best low moisture steam cleaners come from Daimer®, the premier supplier of sophisticated cleaning equipment. They come equipped with a HEPA filter that traps and eliminates allergens from your office building. HEPA filters work with dry as well as wet vacuum functions of steam cleaners in their KleenJet® series. They absorb even the smallest dust particles making them ideal for use in hospitals, nursing homes. and other healthcare facilities. Continuous refill capacity allows these machines to run uninterruptedly – a crucial requirement when the machine is being used to clean huge commercial cleaning.

Daimer® offers many of their low moisture steam cleaners with ATIS® antibacterial technology. Such machines as the KleenJet® 3000CVP can eliminate more than 99 percent of disease causing germs and bacteria on the surface. This helps your business premises to remain healthy and safe for your employees and guests. The 3000CVP works by ejecting dry vapor onto the surfaces to be cleaned. Dry vapor, when ejected at high temperatures, softens residues to help clean up dirt and debris. Low moisture steam cleaners from Daimer® can reach up to 150 psi and temperature levels up to 386°F.

Visit www.daimer.com to read more about low moisture steam cleaners and their applications.

Low Moisture Steam Cleaners Work Wonders in the Kitchen

2011-02-18T00:02:00.001-08:00

Low moisture steam cleaners can be very powerful cleaning tools in commercial kitchen areas, such as in restaurants and hotels. Naturally, these areas need to be kept as clean as possible at all times. This can be hard to manage since these kitchens face an almost constant stream of movement from both indoor and outdoor traffic. Apart from this, these areas are often sensitive to chemical cleaning solutions. Chemicals can leave behind traces of toxins that can contaminate food and harm people. Low moisture steam cleaners help to deal with many unique cleaning problems associated with kitchen areas.

Daimer® understands just how difficult it can be to remove a baked-on stain. For instance, a tomato sauce spill on its own can be hard enough to clean, particularly if it leaves a greasy film behind. In addition, this can be even harder to remove if the stain becomes baked on when it is placed in an oven or on a grill. These stains and deposits harden under the high heat and in many cases; the only way to remove them is to chip them away.

Low moisture steam cleaners, such as Daimer®’s KleenJet® 3000CVP, use super-heated water at temperatures of 349°F to soften even the toughest baked-on stain. Best of all, these low moisture steam cleaners do not rely on cleaning solutions. Pay a visit to www.daimer.com and get more information on low moisture steam cleaners and a host of other cleaning products.

How Low Moisture Steam Cleaners Provide a Cleaner Environment

2011-02-02T22:14:00.000-08:00

There is an important edge that low moisture steam cleaners have over many other conventional cleaning methods. Although the majority of cleaning machines and detergents may eliminate certain stains and dirt deposits, they often leave behind toxic traces or fumes after cleaning. Some cleaning systems may even re-introduce allergens into the area just cleaned. With conventional methods, such as brushes and cleaning detergents, a liquid mess is often left behind. Low moisture steam cleaners from Daimer® are truly unique in that they provide all-round cleaning that other conventional cleaning methods cannot provide.

Many low moisture steam cleaners available from Daimer® come with special anti-bacterial and anti-allergen features. For instance, machines such as the KleenJet® 3000CVP come equipped with a system known as Advanced Thermal Ionic Sanitization™, which works to eliminate more than 99% of harmful germs and bacteria on the surface. This can be extremely helpful in cleaning hospitals, kitchens, and bathrooms, where many chemically based cleaning agents and disinfectants may leave harsh chemical traces behind.

These low moisture steam cleaners also come with a special filtration system that includes both water filtration and HEPA filtration. When dirt is picked up, it passes through the HEPA filter and is then deposited into the water. This ensures that the air that passes out of the machine is as clean as possible and removes the allergens. This is an important asset when cleaning areas with pet dander, pollen, dust, and dirt which in can cause severe allergies. You can visit www.daimer.com to learn more about these low moisture steam cleaners.

Low Moisture Steam Cleaners—The Importance of Using the Right Detail Equipment

2011-01-14T02:42:00.000-08:00

Low moisture steam cleaners use hot steam to melt and loosen dirt. Heat breaks down the bonds holding dirt to the surface. However, while steam boasts powerful cleaning capabilities, other additional tools are needed for optimal removal from varying surfaces. This is why you should pay special attention to the steam cleaning tools kit available with the machine. Daimer® offers their steam cleaners with a variety of accessories for different cleaning applications.

When buying low moisture steam cleaners from Daimer®, you get the assurance of quality and commercial capacity cleaning. Daimer®’s low moisture steam cleaners, such as the KleenJet® Ultra 8485CV, offer powerful cleaning, high boiler capacity, and features such as continuous refill. The boiler and heating element are made of high-grade stainless steel and are capable of withstanding high temperature and pressure levels. Removable heating elements make replacements cheaper and more practical than replacing the entire boiler. Daimer®’s boilers also carry a lifetime warranty, something other competitors do not offer on their low moisture steam cleaners.

Additionally, Daimer® supplies a variety of auto detailing tools to help clean areas such as floors, walls, kitchens, and bathrooms. Most machines come with over 36 different accessories, including squeegee wands, detailing brushes, steam plungers, and more. The available brushes are used for removing soap scum, fungi, food remnants, stains, and dirt. The brushes are available in different shapes and sizes, allowing you to clean inaccessible areas and difficult corners. Daimer® offers microfiber towels with all low moisture steam cleaners. Visit www.daimer.com to learn more about low moisture steam cleaners.

What Low Moisture Steam Cleaners Mean for you

2010-12-31T00:19:00.000-08:00

Low moisture steam cleaners are powerful machines used to execute numerous cleaning applications. Many models from Daimer® also include sanitizing capabilities. This is something many cleaning machines and even cleaning solutions cannot accomplish.

In fact, low moisture steam cleaners from Daimer® have a special technology called Advanced Thermal Ionic Sanitization™. This works to eliminate more than 99% of germs and harmful bacteria from a given surface. Such technology is useful for cleaning areas such as hospitals, gyms, day care centers, and nursing homes, where cleanliness is most important.

To better understand other uses of low moisture steam cleaners, it is important to learn how these machines work. Machines such as Daimer®’s KleenJet® 8860-360CVP reach high temperatures up to 386°F. Such high temperature levels can damage certain surfaces, such as plastic and many delicate fabrics. In addition, they do not feature high pressure levels like pressure washers. For this reason, they are not ideal for degreasing applications.

Low moisture steam cleaners are, however, useful for many cleaning tasks in both kitchens and bathrooms. With Daimer®’s ATIS® technology, such machines as the 8860-360CVP can eliminate harmful germs from kitchen countertops, freezers, toilets, sinks, floors, and more.

For degreasing jobs, it is best to invest in steam pressure washers, which use the cleaning power of high pressure levels and steam to remove heavy grease deposits. To learn more about low moisture steam cleaners and other Daimer® products, visit www.daimer.com.

Low Pressure Steam Cleaners – For Sanitizing Bathrooms

2010-11-29T22:56:00.000-08:00

Low moisture steam cleaners with anti-bacterial technologies use the power of dry vapor to clean and disinfect surfaces often found in bathrooms and kitchens. They are the perfect cleaning machines to clean areas like toilets, bathrooms, gym rooms, and garbage cans. The powerful ATIS® technology offered by Daimer® helps in eliminating bacteria and germs from hidden spaces.

Apart from being user-friendly and easy to maintain, these machines have other features that make them the best cleaning systems for public places and large industrial set-ups. The biggest advantage of low moisture steam cleaners is their high temperatures. Their temperature output can reach up to 386ºF. At such high temperatures, even the toughest of stains and grime are dislodged and removed with very little effort.

Such machines in Daimer®’s KleenJet® series, such as the KleenJet® 3000CVP, include their patented ATIS® anti-bacterial technology. Independent tests have proven this technology capable of destroying more than 99 percent of bacteria and other microorganisms commonly found in kitchens and bathrooms. Their powerful cleaning action removes soap scum, rigid stains, dirt, and grime in a matter of minutes, leaving the surface healthy and free of germs.

Because low moisture steam cleaners emit steam with less than 5 percent water content, the area being clean will not become flooded. Machines with attached vacuums, including the 3000CVP, will eliminate the liquid residue left behind during the cleaning process to greatly enhance user convenience.

Visit www.daimer.com for information on low moisture steam cleaners and their applications.

Low moisture Steam Cleaners – Best Cleaning Machines for Industrial Use

2010-10-19T03:24:00.000-07:00

Low moisture steam cleaners, or dry vapor steam cleaners, are preferred for industrial steam cleaning, as they are perfect for cleaning most hard surface with complete ease. Steam cleaners typically use less water than other cleaning machines, allowing them to easily be used both indoors and outside.

Low moisture steam cleaners in Daimer®’s KleenJet® series use dry vapor steam to dislodge dirt, grime, and stains from industrial floors and machinery, eliminating the need for toxic, harmful cleaning chemicals. However, if additional cleaning power is needed, Daimer® offers Eco-Green® environmentally friendly green cleaning chemicals as a safe alternative to toxic cleaners. Attached vacuum cleaners also allow the machine to pick up left behind liquid residue after the cleaning process is complete.

The best low moisture steam cleaners are available from Daimer®, a global supplier of a wide range of cleaning machines. Many models in their KleenJet® series of equipment, such as the KleenJet® 3000CVP, come with a unique ATIS® technology proven to eliminate more than 99 percent of bacteria from the surface.

Industrial areas having vinyl flooring or even tiled and laminated flooring can be cleaned by these highly efficient machines to get the most difficult cleaning job done is the shortest possible time. The high levels of cleaning are possible because of their high output temperature, which can reach up to 386˚F. Water content expelled by the steam cleaners is less than 5 percent.

To read more about low moisture steam cleaners and their commercial and industrial uses, visit www.daimer.com.

Why Low Moisture Steam Cleaners Are Preferred For Cleaning Gyms

2010-09-06T02:18:00.000-07:00

Many gym owners and people running fitness centers choose low moisture steam cleaners for cleaning their equipment and machinery. Not only are these machines ideal for cleaning hard surfaces, such as floors and fitness equipment, but they are also suitable for maintaining high levels of hygiene.

Need for Low Moisture Steam Cleaners

To understand the need for low moisture steam cleaners, one must first understand how the cleaning process of gyms and fitness centers differ from that of other buildings and business centers. A number of different people use the same gym equipment every day. These people are continually exerting themselves and sweating. This results in an exorbitant amount of additional germs and bacteria, higher than commonly found in an office building.

One big problem in ordinary gyms is the foul smell. People tend to sweat a lot while exercising. The sweat flows to the floor and equipment. If these machines and floors are not cleaned regularly, foul smells may arise and deter gym goers.

How to Avoid That Gym Smell

Using good-quality low moisture steam cleaners is the best option to eliminate odors. These machines provide dry steam as output, which has a temperature of up to 386°F. That means less water is consumed during the cleaning process and little liquid residue is left behind.

These machines use dry vapor steam to soften and dissolve a range of residues. In addition, when paired with an attached vacuum, these steam machines can extract all softened residues, water, sweat, and other deposits on gym equipment, floors, and other surfaces.

To provide even greater cleaning power to gyms and fitness facilities, Daimer® offers ATIS® antibacterial technology. This technology is useful for gyms and spas, as lab tests have proven it can eliminate more than 99 percent of germs and bacteria on the surface. This is a great way to keep gyms clean and safe for members.

Daimer®, a well known supplier of cleaning products, offers low moisture steam cleaners and a number of green chemicals suitable for gym cleaning. For more details, visit www.daimer.com.

Low Moisture Steam Cleaners for Cleaner, Healthier Gyms

2010-08-12T03:12:00.000-07:00

Low moisture steam cleaners are one of the most effective and eco-friendly ways to keep commercial properties clean. Gyms and fitness centers rely on steam cleaning machines to remove salt, sweat stains, and germs from fitness equipment. Handles, seats, handrails, equipment, benches, locker rooms, and washrooms at a fitness center should be regularly steam cleaned to maintain indoor hygiene, remove stains, eliminate germs, destroy allergens, and deodorize the facility.

Low moisture steam cleaners are ideal for commercial use because they boast tremendous cleaning power without additional detergent and very little water. The best low moisture steam cleaners have durable parts, such as stainless steel boilers, detachable heating elements, and corrosion-resistant housing. Machines meant for commercial use should not be purchased from a vendor of home-use steam cleaners. Low-end steam cleaners cannot outlast the rigorous demands of a commercial establishment.

Low moisture steam cleaners by Daimer® are equipped with HEPA filters to trap and remove allergens. The HEPA filter works with the dry and wet vac functions of the steam cleaner. Most steam cleaners from Daimer® have continuous refill capacity to maintain steady boiler pressure and facilitate continuous operation.

To effectively remove germs, Daimer® offers steam cleaners with ATIS® anti-bacterial technology. This feature has been proven to eliminate more than 99 percent of germs and bacteria on the surface. It helps create a cleaner, healthier environment for employees and guests.

Chewing gum is a frequent problem in commercial areas. If you are facing a tough time removing sticky or hardened, old gum from gym equipment, floors, furniture, and walls, use low moisture steam cleaners fitted with gum removal kits. The KleenJet® Supreme 3000CVGP, includes a gum removal squeegee tool, stainless steel brushes, and GUM-EXTERMINATOR® Liquid for more effective cleaning. This model blends the best of all Daimer®'s steam cleaner technologies with ATIS® antibacterial capabilities, gum removal technologies, continuous refill functionality, HEPA and water filtration, and more. Visit www.daimer.com to see detailed product descriptions and place orders.

Low Moisture Steam Cleaners Help save the Environment

2010-07-27T04:39:00.000-07:00

Chemical-based detergents have a huge impact on the environment. They pollute reservoirs, leach into the soil, and poison the food chain. Cleaning without detergents is possible only if you use powerful machines, such as low moisture steam cleaners. Instead of detergents, low moisture steam cleaners depend on heat to achieve sparkling cleanliness and eliminate germs, pests, and fungi.

Steam cleaners are beneficial to the environment not only because they facilitate detergent-free cleaning, but also because they decrease water use. These machines use dry vapor with very low water content. This cuts down on water consumption as well as allowing for faster drying. Low moisture steam cleaners are ideal for commercial or home use and they can be used in places where water shortage is a chronic problem.

Besides cleaning dirt and stains from surfaces, many low moisture steam cleaners are equipped with anti-bacterial technology for eliminating more than 99% of germs from surfaces. For exclusive anti-bacterial technology, consider the KleenJet® ATIS® steam cleaning machines by Daimer®. They also have special HEPA filters to contain allergens and pollen, leaving the indoor air clean and healthy. Most of Daimer®’s commercial steam cleaners have wet and dry vacuum extraction for added convenience.

In the event that you require additional cleaning power, try Daimer®’s specially formulated green chemicals. These plant-based products do not contain harmful solutions. They are biodegradable and environmentally safe. Non-toxic Eco-Green® products are designed to meet OSHA norms. You can use them the same way you use regular detergents. Visit www.daimer.com for more information on low moisture steam cleaners and Daimer®’s line of eco-friendly cleaning products.

Clean Floors with Low Moisture Steam Cleaners

2010-07-06T01:53:00.000-07:00

Low moisture steam cleaners have now become one of the most preferred cleaning machines for cleaning a variety of hard floors. One can use these machines to clean linoleum, vinyl, tiled, or laminated floors. The following are some tips to consider when choosing these machines.

What Are Low Moisture Steam Cleaners?

Most good quality steam cleaning machines can be included in this category. Low moisture refers to the low water content used by these machines. As a result of the high output temperature, which often ranges up to 386°F, the water content of low moisture steam cleaners is less than 5 percent.

Advantages

The high temperature output of low moisture steam cleaners serves two purposes. First, it cleans more efficiently and quickly than do other machines. Second, these machines do not leave behind large amounts of water on the cleaned surface.

In addition, low moisture steam cleaners are particularly useful for cleaning floors and mats. Water runoff is a major problem when cleaning floors using other cleaning machines. Since a very low quantity of water is transferred to the surface when using steam cleaning systems, run off is not as much of a concern.

Tips to Select Machines

Not all steam cleaning machines have the qualities mentioned above. A customer has to select a machine from a reputable brand. Daimer®, a premier distributor of cleaning products, offers many models of low moisture steam cleaners in its KleenJet® series. The integration of advanced technologies is also important, something Daimer® has facilitated through each of its models. For more details about these machines, visit www.daimer.com.

Low Moisture Steam Cleaners You Can Use at the Office

2010-04-26T00:31:00.000-07:00

It is true that many low moisture steam cleaners are designed for different types of commercial use. They are often called in to clean commercial kitchens, bathrooms and even spot clean carpets and upholstery. A large benefit of using these machines is that they do not rely on toxic chemicals to get their cleaning done. This means there is no risk of toxic fumes or traces being left behind after you finish cleaning. Daimer® offers low moisture steam cleaners that can be used in a number of different ways around the office.

One of the toughest jobs in commercial areas is cleaning grout and tiles. These areas can attract tough stains as well as harmful bacteria and germs, like black mold. Low moisture steam cleaners work to penetrate the grout without damaging it. In this way, it easily loosens and removes stains and residues. Best of all, these low moisture steam cleaners remove deposits completely. They can be used to clean food preparation areas and storage areas like freezers and refrigerators. They are also very effective in cleaning restrooms.

One benefit of using low moisture steam cleaners is that many machines from Daimer® include their patented ATIS® technology, proven to eliminate up to 99 percent of germs and bacteria present on the surface. These steam cleaning units can finish a cleaning job much quicker than conventional methods. You can visit www.daimer.com to learn more about these and other cleaning machines.

Low Moisture Steam Cleaners For Chewing Gum Removal

2010-04-06T02:08:00.000-07:00

Low moisture steam cleaners function by ejecting dry steam output onto surfaces to soften and dissolve dirt and stains. The water content in the output is very low — often below 5 percent.

Advantages of Low Moisture Steam Cleaners

The benefits of these systems are twofold. First, their efficiency is very high. Water is heated to high temperatures reaching 360°F, depending upon the model, to obtain low moisture output. The efficiency of the machine increases with the rise in temperature. Second, while using these systems, there is less water waste. Because of the low water content, the surfaces dry quickly and the water runoff does not pose any problem.

These features make low moisture steam cleaners ideal machines to remove chewing gum residues.

Chewing Gum Removal

One can find chewing gum residue on the floors and walls of educational institutions, shopping malls, parks, sidewalks, theaters, parking lots, and other areas. Such residues are an eyesore and ruin the appearance of a building, but can also be very hard to remove.

Low moisture steam cleaners are the ideal machines for removing chewing gum residue. However, not just any low moisture system will work. Daimer Industries®, the world's foremost steam cleaner supplier, offers a line of Gum Exterminator® steam cleaner machines for rapid gum removal. The high output temperature paired with the specialized Gum Remover® Liquid melts the chewing gum residue. They heavy-duty stainless steel brush is used to agitate the most stubborn deposits. And, the attached vacuum extracts the molten residue. The cleaning process is so easy and fast that even a person with little experience can eliminate 1000s of pieces per day. For additional information on low moisture steam cleaners and other cleaning products by Daimer®, visit www.daimer.com.

Low Moisture Steam Cleaners Tackle Baked-On Stains

2010-03-09T02:30:00.000-08:00

Low moisture steam cleaners are often called in to tackle the tough cleaning jobs. For instance, cleaning grout lines usually requires a dry steam cleaner to remove soaked-in stains and deeply-rooted black mold. Places like food preparation areas, where toxic chemicals can become dangerous, often use these dry steam cleaners to keep surfaces clean and hygienic. One particular application in food preparation facilities, where the power of steam is required, is in the removal of tough, baked on stains from ovens, pots, pans, baking racks, and more.

Daimer® understands how hard it can be to get these stains and deposits off. An ordinary food or beverage spill can be hard enough to deal with on its own. Sometimes, that spill is later exposed to high temperatures on a grill, stove, and in ovens. The result is hardened stains that become even harder and more difficult to remove. Oftentimes people have had to resort to manual scraping and chipping away to eliminate tough baked-on stains. Luckily, low moisture steam cleaners can do the job faster and much more effectively.

It is their generation of high steam temperatures that works towards loosening up and melting hard, baked-on stains and deposits. There is no need to scrape or chip away at anything. Under the heat action of the low moisture steam cleaners, baked-on deposits will soften and dissolve with relative ease and can be completely removed. Dissolved stains can be quickly wiped away or extracted when using a steam cleaner with an attached vacuum. Visit www.daimer.com to learn about other ways in which low moisture steam cleaning systems can be used.

Low Moisture Steam Cleaners – Maintaining Indoor Hygiene

2010-02-22T01:31:00.000-08:00

The quality of indoor air is important to ensure the health of those who exposed to the surface. Dry vacuum systems remove much of the visible dirt, dust, hair, dander, pollen, and other disease causing factors. However, they leave behind much that is invisible to the naked eye.

Low moisture steam cleaners equipped with HEPA filters, on the other hand, provide up to 99 percent removal of dry particles, including dust. Where ordinary vacuum cleaners release the particles back into the air after suctioning them in, a HEPA filter prevents the return of these particles to the atmosphere. This helps maintain indoor air quality.

However, low moisture steam cleaners are not primarily used for dry vacuuming, even if they are very effective in removing dust. These machines are used for regular steam cleaning operations — with one added advantage. Ordinary steam cleaners can only break down the dirt, not remove them. Daimer®’s low moisture steam cleaners have vacuum suction that can extract water and dirt from the surface, leaving it clean. A water storage tank and an extraction tank are also built into some models. Find out more about how to use low moisture steam cleaners at www.daimer.com

Picking the Right Accessories for Steam Cleaners

2010-01-31T23:01:00.000-08:00

Low moisture steam cleaners produce an output of dry vapor with less than 5 percent of water content. This vapor is suitable for cleaning almost all types of hard and semi-hard surfaces.

These machines have an output temperature as high as 360°F. Therefore, the surface should be strong enough to withstand the high temperature output. One must avoid using these machines on cloth and paper coated surfaces, certain types of soft wood surfaces, and other heat sensitive materials.

Tips for Selecting Accessories
Low moisture steam cleaners include detail brushes, which are used to agitate and loosen dirt and residues for faster removal. The detail brushes are the most damage-prone part of these machines. If used frequently, the user will have to replace the detail brushes often. To minimize the cost of brushes, it is best to select a supplier that uses high-quality, but low cost detail brushes. More expensive brushes offer the same results at a greatly higher cost.

Low moisture steam cleaners that use replaceable heating elements also ensure cost-effectiveness. If the heating element is damaged, the user needs to replace only the heating element. Machines with heating rods welded to the boiler require the replacement of the entire boiler in the event of failure.

That is why one must select low moisture steam cleaners supplied by Daimer®, a renowned distributor of cleaning products. Steam cleaners in the KleenJet® series by Daimer® offer both cost-effective detail brushes and replaceable heating elements. For more information, visit www.daimer.com.

Use Low Moisture Steam Cleaners and Stay Healthy

2010-01-10T23:22:00.000-08:00

Low moisture steam cleaners eject dry vapor onto floors, walls, glass and metal surfaces, and other materials. The main purpose of these machines is to remove mold, stains, dirt, and any other debris present on the surface.

Low moisture steam cleaners can provide an output pressure level of 150 psi and an output temperature of 360°F. Such high temperatures melt away tough stains and dirt deposits. However, the high temperature output is only one advantage of low moisture steam cleaners by Daimer®. Daimer's latest steam cleaning machines are equipped with two innovations: ATIS® technology and HEPA filters. These ensure a clean and microorganism-free environment.

ATIS® Technology
This is a special anti-bacterial technology exclusive to Daimer®. A number of low moisture steam cleaners in the KleenJet® series of Daimer® are equipped with this technology. External laboratory tests have proven that ATIS® technology is capable of killing more than 99 percent of commonly occurring disease-causing bacteria and fungi.

HEPA Filters
HEPA filters absorb even the smallest dust particles. Ordinary filters lack the quality to absorb very small particles. HEPA filters have no such constraints. Low moisture steam cleaners fitted with HEPA filters are ideal for filtering out allergens in cleaning nursing homes, hospitals, and other facilities that treat asthma patients and people with respiratory problems.

For more information on these products, visit www.daimer.com.

Low Moisture Steam Cleaners for Disinfecting Garbage Bins

2009-12-23T21:53:00.001-08:00

Low moisture steam cleaners with anti-bacterial technology use dry vapor to clean and disinfect even the most unhygienic surfaces. Most cleaning professionals use these systems to clean and disinfect public garbage bins.

Benefits of Low Moisture Steam Cleaners
Steam cleaners are relatively easy to use and simple to maintain. However, their user-friendly capabilities are not the only reason these machines are used to clean public places and large institutions. There are two main advantages for low moisture steam cleaners. The first is the high temperature of the output (often, up to 360°F degree Fahrenheit in the best machines). This helps eliminate even the toughest dirt deposits and stains.

The second advantage is the surfaces of trash bins dry up faster when using steam cleaners than when using other cleaning methods. The water content of the best low moisture steam cleaners is often less than 5 percent. That means a very low quantity of water is transferred to the surface from the machine. As a result, no watery mess is left to clean up after.

Ideal Models for Cleaning Trash Bins
Daimer®, a leading supplier of cleaning machines, offers low moisture steam cleaners equipped with a unique anti-bacterial technology called ATIS®. External tests have proven that this technology is capable of killing up to 99 percent of commonly found bacteria and fungi. Therefore, these models are suitable for use in cleaning garbage and trash bins in public places and institutions, such as hospitals, hotels, and colleges.

For more information about these products and other cleaning equipment, you may log on to www.daimer.com.

What Works Best for Industrial Degreasing Applications?

2009-12-04T22:50:00.000-08:00

Low moisture steam cleaners that generate super-heated dry steam are widely used in commercial and industrial environments to manage a host of demanding cleaning applications. Steam cleaning machines such as the KleenJet® Supreme 3000CV from Daimer® offer exceptional cleaning power by generating steam at temperatures up to 329ºF with pressure levels up to 96 psi. Additionally, the high steam density of steam cleaning machines by Daimer® enables them to achieve superior cleaning results. In fact, the density of steam ejected by top-grade low moisture steam cleaners is about 200 percent greater than the steam volume generated by cheaper models.

In spite of the aggressive cleaning power provided by low moisture steam cleaners, it is important to note they are not suitable for heavy-duty degreasing jobs in industrial areas. To efficiently degrease industrial areas, you need to use cleaning machines with both high pressure levels and high temperatures. Steam cleaning machines have low pressure levels, meaning they are not the best options for industrial degreasing applications.

To clean greasy industrial equipment, it is recommended you choose steam pressure washers belonging to the Super Max™ line from Daimer®. With high pressure levels of up to 3000 psi, high steam temperatures up to 330ºF, and flow rates up to 5 GPM, steam pressure washers such as the Super Max™ 12880 outperform low moisture steam cleaners when it comes to industrial degreasing jobs.

A comprehensive listing of the limitations and applications of low moisture steam cleaners is available at www.daimer.com.

Practical Applications of Low Moisture Steam Cleaners

2009-11-20T23:22:00.000-08:00

Low moisture steam cleaners pump dry vapor (that is, vapor with less than 5 percent of water content) on to a surface to clean and sanitize it. These devices, paired with anti-bacterial technology like Daimer’s ATIS®, kill up to 99.9% of bacteria, fungi, and other microorganisms. Temperature levels of these devices range up to 360°F to soften and remove all types of dirt and impurities from surfaces.

The main advantage of low moisture steam cleaners is their efficiency. There are few species of microorganisms able to survive the high temperature and anti-bacterial technology utilized by ATIS® steam cleaners.

This Advanced Thermal Ionic Sanitization™ technology is designed specifically to eliminate commonly found fungi and bacteria. Many latest models of KleenJet® series from Daimer® make use of this technology.

Low moisture steam cleaners are suitable for spot cleaning carpets, upholstery, and mats as well. The main advantage of using steam cleaners is that the time required for drying the surface is very short. However, one has to ensure two things. First, the surface to be cleaned is not heat sensitive. Second, the surface is not overexposed to the steam output.

Log on to www.daimer.com for more information on the practical applications of these machines.

Low Moisture Steam Cleaners Work Well on HVAC Equipment

2009-11-05T01:33:00.001-08:00

There are times when it is necessary to utilize low moisture steam cleaners. This may be especially true when you need to clean things like HVAC, condenser coils, or other moisture-sensitive equipment. Using low moisture steam cleaners allows for effective cleaning without excessive moisture that needs to be removed afterwards.

For HVAC and condenser coils, keeping them free of dirt and grime will ensure they continue to operate at an optimum level. Dirt and grime buildup can affect the performance of a piece of equipment, so using low moisture steam cleaners on a regular basis will ensure less downtime and repair expenses.

Daimer® offers industrial as well as commercial grade machines through their KleenJet® line of steam cleaners. Knowing how often you will use the machine as well as the size of the job can help you purchase the right model. You have the option to choose from machines with vacuum extraction tanks or without. Depending on what you are cleaning, the vacuum extraction can alleviate the watery mess left behind after steam cleaning.

The uses for low moisture steam cleaners are virtually countless when it comes to cleaning HVAC, condenser coils, and other parts. Using them as part of regular maintenance on your machines can save you money in the long run. After all, clean coils increase the efficiency of the system.

Visiting the Daimer® website at www.daimer.com can give you a good idea of what is available on the market for steam cleaning machines. Their detailed descriptions on their KleenJet® line of low moisture steam cleaners will help you make an informed decision on what is right for your needs.

Using Low Moisture Steam Cleaners to Remove Dirt and Stains

2009-10-23T02:55:00.000-07:00

Low moisture steam cleaners work by ejecting dry vapor onto surfaces to soften residues and clean up debris. These devices are handy in removing impurities from a surface and also sanitizing the surface, making it a safer area for family members, employees, customers, pets, and others.. Dry vapor means steam with a very low water content, often as low as 5 percent. This type of vapor is obtained by heating water up to a certain temperature.

A good example of low moisture steam cleaners is the KleenJet® series from Daimer®. As people familiar with the cleaning industry know very well, Daimer® is a leading supplier and distributor of cleaning equipment. The equipment can be used for a variety of cleaning jobs, from cleaning window glass to sanitizing bathroom floors and walls. The most important convenience of low moisture steam cleaners is that they do not make the surfaces overly wet. The surfaces will dry quickly once the cleaning process is complete.

However, the user has to keep in mind certain important guidelines while using low moisture steam cleaners. The first aspect is that these devices are not ideal for use on very delicate surfaces, for example, surfaces with paper coating. Second, these are not suitable for cleaning jobs that require very high pressure output. The pressure output of these machines can go as high as 150 psi. Therefore, these are not suitable for heavy-duty degreasing applications in industrial facilities.

It would be worth it to visit www.daimer.com to learn more information about low moisture steam cleaners and their applications.

Low Moisture Steam Cleaners – Perfect Options for Cleaning Floors

2009-10-05T02:30:00.000-07:00

Regardless of whether your house features tiles, vinyl, or hardwood floors, it is an obvious fact that if you clean and maintain your surfaces properly, they will continue to last for years. Vacuuming or mopping is usually adequate to keep floors clean. However, for extra-clean floors, you must steam clean them with low moisture steam cleaners. These cleaning machines are great for cleaning, disinfecting and deodorizing almost all styles of surfaces and floors.

Daimer® — a leading supplier of high-quality cleaning machines — now offers you the KleenJet® range of well-built, powerful steam cleaners that can reach high pressure levels of up to 150 psi and super-hot steam temperatures of up to 360ºF for exceptional cleaning power. That makes these machines perfect for various household, commercial, or industrial uses.

Most industrial and commercial versions of KleenJet® low moisture steam cleaners feature two tanks for continuous refilling, allowing to accomplish non-stop cleaning for hours. In addition, the innovative self-cleaning boiler technology of these steam cleaning machines keeps the boiler free from any harmful build-up that may harmfully affect the steam cleaning performance.

The dry steam ejected by low moisture steam cleaners is capable of softening the toughest grime, grease, and stains that can be wiped off easily. Best of all, since these steam cleaning machines can disinfect and deodorize with the power of steam, toxic chemicals can be completely avoided.

To learn about how low moisture steam cleaners can help you keep your floors clean and sparkling, visit www.daimer.com.

Using Low Moisture Steam Cleaners for Spot Cleaning Carpets

2009-07-31T04:27:00.001-07:00

Did you know that low moisture steam cleaners may also be efficient in spot cleaning carpets? Yes, it’s true, provided you use the advanced KleenJet® range of low moisture steam cleaners from Daimer®.

Steam cleaning machines from Daimer® are exceptionally good when it comes to cleaning hard floor surfaces as well as effectively spot cleaning carpets. That means you do not have to purchase one machine to steam clean your floors and another one to spot clean your carpets. However, it is important to understand that the technology of low moisture steam cleaners is inappropriate to accomplish a professional, full carpet cleaning.

One outstanding example of low moisture steam cleaners is the KleenJet® 1000CVP. This steam cleaner can reach high temperatures up to 320°F for effective cleaning and sanitizing. The variety of tools and brushes allow users to select the precise equipment to accomplish the cleaning of hard surfaces or spot cleaning carpets. Additionally, the ATIS® technology will actually eliminate up to 99.9% of bacteria in or on these surfaces, making your home or workplace as safe and healthy as possible.

Using low moisture, “dry” steam, these steam cleaners use less water than comparable units on the market. The benefits of this are twofold. First, you can reduce costs associated with heavy water usage, as this machine is water efficient. And, second, you don’t have to worry about excessive amounts of water damaging your carpet. Additionally, the low-moisture steam allows the cleaned sections of carpet to dry quickly, eliminating risk of mold growth.

So arm yourself with low moisture steam cleaners from www.daimer.com and eliminate the stains on your favorite carpet.

It’s Time to Steam Clean Your Sliding Doors

2009-06-29T23:22:00.000-07:00

Sliding doors – also known as bypass doors – are found in a variety of locations in the house or business: in bathrooms as access to the shower unit, as gateways to exterior locations like decks and patios, and more. While sliding doors can be real space savers, cleaning them can be quite difficult. This is mainly because it is hard to access certain areas of sliding doors like the area where they overlap. To dissolve any accumulated dirt or grime in these areas, it is best to go for steam cleaning with low moisture steam cleaners.

While purchasing steam cleaners, it is important to look for quality models from top suppliers. Now Daimer® - an established provider of advanced cleaning machines – brings you a wide variety of steam cleaners in the KleenJet® line to choose from. These innovative steam machines enable you to enjoy the amazing cleaning power of steam that is aggressive on dirt deposits yet gentle on the surface. In fact, no additional harmful chemicals are required, just water. This ensures your home or business is truly safe and clean.

With super-heated steam temperatures of up to 360ºF , these steam cleaners transform cleaning tasks into fast, easy and even enjoyable jobs. Actually, these steam cleaners are able to eliminate most stubborn deposits like dirt, soap scum, and grime on sliding doors and their tracks in no time.

Due to the low moisture feature of these steam cleaners, you will be able to save lots of water as well as save the trouble of having to wipe off excess water later on. To learn more about the many cleaning applications of Daimer®’s steam cleaners, simply log on to www.daimer.com.

Low Moisture Steam Cleaners – For Super Shiny Faucets!

2009-06-01T05:09:00.000-07:00

Are you having a tough time cleaning deposits or grimy fingerprints from your faucets? Keeping your faucets clean and shiny is not an easy task, especially if you find it impossible to clean faucets more than once a week. Even chemical cleaners may not be of much help in cleaning faucets. This is where you need to consider using steam cleaners.

The latest generation of KleenJet ® low moisture steam cleaners from Daimer® has made cleaning faucets unbelievably simple. Steam cleaning involves using superheated water from a tank for attacking stains. Steam is directly aimed at stains using a special wand and applicator.

The hot steam generated by these cleaning machines softens the toughest stains and grime, making it easy to remove them. This means you can almost completely avoid the use of harmful chemicals and go green with these low moisture, water efficient steam cleaners.

Many models of industrial and commercial KleenJet ® steam cleaning machines feature two tanks that enable continuous refill capability for non-stop cleaning. In addition, the self-cleaning technology of boilers in these steam cleaners prevents harmful build-up of scale inside the boiler. This technology is greatly beneficial in ensuring the maximum temperature and pressure levels during each use.

Shift to the amazing range of steam cleaners from www.daimer.com and watch how your faucets shine like never before!

Low Moisture Steam Cleaners– For 100 Percent Elimination Of Fleas

2009-04-30T04:11:00.000-07:00

An infestation of fleas can be a real nightmare. Although fleas live on pets, their eggs can fall off on carpets, beds, and all other places frequented by pets. So, people turn to chemical products to clean off these pests. However, now there’s a way to eliminate fleas without soaking your house in chemical pesticides – simply use steam cleaners featuring low-moisture steam.

Although these “dry” steam cleaners may look similar to vacuum cleaners, they work quite differently. Dry steam generated by these steam cleaning machines provides a powerful cleaning solution compared to scrubbing and using cleaning chemicals. Since these cleaning equipments do not need use any chemicals, you get to experience the most environment-friendly cleaning system ever.

Steam cleaning your house with steam cleaners using “dry” vapor steam is a great way to kill fleas in all stages except the eggs. Combine this steam cleaning technique with regular vacuuming and you can easily get rid if the eggs too.

Now Daimer® brings you the KleenJet® series of powerful, rugged steam cleaners that offer high temperatures up to 300ºF and pressure of up to 1000 psi for unmatched cleaning power. These cleaning equipments are ideal for commercial or industrial applications that require powerful cleaning capabilities with the efficiency of low flow rate.

Various advanced models of steam cleaners are available at www.daimer.com.

Cleaning Shower Stalls

2009-04-20T04:00:00.000-07:00

Shower stalls in virtually any location are known to collect dirt and soap scum that both tarnish the appearance and create an un-clean environment. Let’s face, you take a shower to get clean, not to get even dirtier. Thus, maintaining the cleanliness of shower stalls is essential. Homes, gyms, healthcare facilities, nursing homes, apartments, and virtually every other place that has shower facilities knows of this crucial need.

To achieve these results, the use of steam cleaners is virtually unparalleled in its ability to maintain the cleanliness of shower stalls. Steam Cleaners, like those in the KleenJet ® line by Daimer ®, use ultra high steam temperatures up to 360ºF to sanitize and disinfect surfaces while cleaning. Thus, removing soap scum and dirt are not the only benefits of these machines. Daimer®’s KleenJet® steam cleaners can actually kill bacteria and germs left in shower stalls by people. This results in the most clean and healthy shower stalls in any environment.

For the most effective shower stall cleaning, Daimer ® suggests pre-applying Eco-Green ® Tile & Grout Cleaner with Soap Scum Remover. This green chemical aids Daimer®’s steam cleaners by breaking down the dirt, grease, and soap scum molecules and emulsifying them in water so that they are easy to rinse away, thus greatly speeding up the cleaning process. Not only are these green chemicals effective, they are also plant-based and non-toxic. This means they are safe for people and use in any environment. Runoff down drains is also not a problem, as Eco-Green ® is 100% readily biodegradable.

For steam cleaners and green chemicals that will allow you to achieve the highest degree of clean in your shower stalls and a wide variety of other applications, Daimer ® is your source. Learn more about the many benefits of steam cleaners at www.daimer.com.